Golf Clubs Information

Our Featured Golf Article


Get this best selling golf eBook and Mp3 audio file to improve your skill level

Wondering which golf clubs you should buy?

By: Lee MacRae

With such a large variety of golf clubs on the market today, it is no wonder that many newcomers to the game have a hard time when it comes to choosing new clubs.

Read along as we discuss the types available and what they each can do for your game of golf.

How tall are you? Standard clubs are made for anyone between 5 to 6 feet tall and should work out fine. The principle applies to both sexes. Taller or shorter? Then custom clubs may now come in to the picture.

Cast Iron or Forged Iron Golf Club?

Generally, you will find that cast iron clubs are the way to go.

Why do we say that? Very simply because standard cast iron clubs tend to have a larger "sweet spot". The trem refers to the best area on the club face that will give you the maximum range and accuracy on a shot. The bigger the sweet spot, the better chance of hitting well it every time. It makes it a little easier to hit the "bulls eye" every time on your shots. It is for that main reason the beginners are steered towards cast iron clubs. Without a steady consistant swing, a larger striking area will produce better shots overall. This is the major reason why you see larger or even "oversized" clubs made, especially the oversized drivers today. These clubs allow for a larger sweet spot and make the game a lot easier for the average player

Forged iron clubs are generally the opposite. Harder to hit with because of a smaller sweet spot on the club face.

So why even make golf clubs out of forged iron, you ask?

Because the "softer" forged metal gives the golfer a better feel than the harder cast iron does. The more seasoned player, especially the pros on the circuit, don't need that larger sweet spot. They have a more consistant swing plane and strike the ball with far more accuracy. They use the "feel" of the the forged iron clubs to influence the flight of the ball in a way that a beginner or average player can't.

The next item to consider is the material for the shaft. Will it be composite or steel?

The major criteria here is club speed. An average golfer will have a club head speed of 80-94 mph. Lower speeds usually means you should look at a composite shaft. The problem with lower speed is you get less distance on your shots. You need to generate more speed [and more power] or find some way to compensate until you can. And that is where the composite golf club shaft enters the picture. It gives you a lot more distance than you would get with your normal swing and a steel shaft.

On the other hand, if you already have good distance on your shots due to good swing speed, you can add some touch and feel to your game very similar to that obtained by using the forged iron clubs. You get the best of both worlds.

Determining your own swing speed is not difficult. If you don't have a local pro shop with the right equipment, you can find small microwave Doppler radar devices that are run by AAA batterieson the market. You simply set it near your tee and swing away.

With just a few small tips like this, you should be able to determine which clubs will work for you and why. Knowing why is just a important because you will be able to adjust your equipment as you improve on your game over time. If you find your swing speed improving, you may find you will be able to switch to clubs that will give you the feel and shot selection of the better players.

Work on these tips and make sure you tee off with a positive mindset. The more you practice and implement what you learn, the more confidence you will gain in your ability to hit it straight and long. And watch your scores begin to plummet!

Improve your golf game with a great golf training aid today!

Some Quick Golf Information

Lean Left
It's critical to start and keep your weight toward your front foot during the entire motion of a bunker shot. This encourages the club to sustain its speed through impact, which in turn creates the wave of sand necessary to carry the ball in the air.
...Golf Tips magazine

The key to hitting the ball farther with the modern driver and golf ball (which spins much less off of a flat face than balls of the past) is high launch combined with a low spin rate. Our goal is to get enough spin to achieve lift, while minimizing (hopefully eliminating) drag.
...golf news

Many swing faults occur from an improper setup. This can cause unnecessary adjustments during the swing. Taking care to position the ball, feet, hips and shoulders properly ensures building a good swing foundation. Testing has shown golfers with open stances show no more tendency to slice than golfers with closed stances. The open stance may give the golfers a little more opportunity to slice, because it allows a little more freedom in the downswing and follow-though. The square stance is used by most successful golfers. Beginners should start with a square stance. As you advance, you can experiment with the advantages of other stances. Avoid extreme stances. Experiment to find the stance that works best for you. Take care to set up consistently on all normal shots.
...PGA of America

"The main idea in golf as in life, I suppose is to learn to accept what cannot be altered and to keep on doing one's own reasoned and resolute best whether the prospect be bleak or rosy." Bobby Jones
...US Golf Association

Today's Golf News

Hedblom, Millar share Andalucia lead

Fri, 28 Mar 2008 20:17:13 GMT
Peter Hedblom of Sweden and Matthew Millar of Australia shared the lead by one stroke after the second round of the Andalucia Open on Friday.

Hedblom shot an 8-under 67 and Millar had a 69 to total 8-under 136 at Aloha Golf Club.

Robert Dinwiddie of England (65), Thomas Levet of France (68) and David Lynn of England (67) are tied for third.

Defending champion Lee Westwood (73) is one of seven golfers a further shot back at 138.

Bart Bryant: In the Zone

Tue, 08 Nov 2005 00:00:00 GMT
During the filming of a Titleist commercial just a day before teeing it up at THE TOUR Championship, we asked Bart Bryant what it means when an athlete describes "being in the zone." Bart fired a first round 8-under par 62 the next day and posted a record-setting performance en route to a 6-stroke wire-to-wire victory. Here's what Bart had to say before the tournament began . . .

Archer takes it 'easy' to raise hopes of breaking victory drought

Sat, 01 Mar 2008 00:00:01 +0000
<p>Phillip Archer and Graeme Storm put themselves in strong positions at the Johnnie Walker Classic here yesterday, finishing the second round within striking distance of co-leaders Shiv Kapur of India and Australia's Unho Park.</p>

Titleist Tour Report: Bell Canadian Open

Fri, 08 Sep 2006 00:00:00 GMT
This week's Titleist Tour Report from the Bell Canadian Open features Pro V1x player Bob May.

golf balls | callaway golf | golf travel case